16. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR MXU 300/250
5. Release the rings and remove the rubber
band (6).
6. Shift the battery (7) and the terminal
leads face you.
7. Disconnect the negative (-) terminal lead
(8) from the battery first, then disconnect
the positive (+) terminal lead (9).
8. Remove the battery.
When disconnecting the battery positive
(+) cable, do not touch the frame with
tool; otherwise it will cause short circuit
and sparks to fire the fuel.
INSTALLATION
1. Installation is in the reverse order of
removal.
First connect the positive (+) cable and then
negative (-) cable to avoid short circuit.
2. Make sure the battery is installed upright
as shown
3. Check all bolts and other fasteners are
secure.
4. After installing the battery, check to see if
the battery cables are routed correctly.
16-5
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5