17. BRAKE SYSTEM MYROAD 700i
SERVICE INFORMATION
GENERAL
Frequent inhalation of brake pad dust, regardless of material composition could be hazardous
to your health.
Avoid breathing dust particles.
· A contaminated brake disc or pad reduces stopping power. Discard contaminated parts and
clean a contaminated disc with high quality brake degreasing agent.
· Avoid spilling brake fluid on painted, plastic or rubber parts. Place a rag over these parts
whenever the system is serviced.
· This section covers maintenance of the front and rear hydraulic brake system.
· Never allow contamination (dirt, water, etc.) to get into and open reservoir.
· Once the hydraulic system has been opened, or if the brake feel spongy, the system must be
bled.
· Always use fresh DOT 4 brake fluid from a sealed container when servicing the system. Do not
mix different types of fluid as they may not be compatible.
· Always check brake operation before riding the vehicle.
SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Front Specified brake fluid DOT 4
Brake disc thickness 5.0 4.5
Brake disc runout 0.03
Rear Specified brake fluid DOT 4
Brake disc thickness 6.0 5.5
Brake disc warpage 0.03
17-2