people 125 Workshop-manual : Page 37

          3. INSPECTION/ADJUSTMENT                                               PEOPLE 125/150
                                                  carbon deposits have accumulated on the
                                                  combustion chamber and the piston head.

                                                             Timing Hole Cap
 IGNITION TIMING
   The CDI unit is not adjustable. If the
   ignition timing is incorrect, check the
   ignition system. ( 15-6)

 Remove the rear right side cover.
 Remove the timing hole cap.




                                                     Timing Light
 Check the ignition timing with a timing light.
 When the engine is running at idle speed, the
 ignition timing is correct if the "F" mark on
 the flywheel aligns with the index mark on
 the crankcase.




 Also use a timing light to check the advance                Advance Mark
 mark.
 Raise the engine speed to 5,000rpm and the
 index mark on the crankcase should be
 aligned with the advance mark on the
 flywheel.

 CYLINDER COMPRESSION
 Warm up the engine before compression test.
 Remove the met-in box and frame center
 cover. ( 2)
 Remove the spark plug .
 Insert a compression gauge.
 Open the throttle valve fully and push the                         "F" Mark
 starter button to test the compression.
 Compression: 12.8kg/cm-570rpm
 If the compression is low, check for the
 following:
 - Leaky valves
 - Valve clearance to small
 - Leaking cylinder head gasket
 - Piston rings are worn out.
 - Piston/cylinder is worn out.
 If the compression is high, it indicates that
                                                                                   3-6