new pulsar 125 Workshop-manual : Page 153

          16. CHARGING SYSTEM                                                         Pulsar     CK   125


 BATTERY CHARGING
 Connect the charger positive cable to the
 battery positive terminal.
 Connect the charger negative cable to the
 battery negative terminal.

 CHARGING METHOD:
 Standard Charging:
    0.7A charging 10 hours
 Quick Charging:
    7A charging 23 hours
 Charge the battery at 0.7A until the
    specific gravity is 1.2601.280 (20).




       Warning                                                      Specific Gravity VS Charging Time
  · Before charging a battery, remove all
                                                 Specific Gravity




    cell caps to prevent battery case damage.
  · Keep flames and sparks away from a
    charging battery to prevent igniting the
    hydrogen gas produced by the battery.
  · Turn power ON/OFF at the charger, not
    at the battery terminals to prevent sparks
    near the battery cells.
  · Discontinue charging if the electrolyte                            Charging Time
    temperature exceeds 45.

 · Quick charging should only be done in
     an emergency; slow-charging is
     preferred.
   · After the battery is installed, check
     routing of the breather tube as shown
     on the battery caution label.




                                                                                            16-4