zing 125 qe Workshop-manual : Page 79

          9. CLUTCH/GEAR SHIFT MECHANISM                                                       ZING II 125

                                                              Bolts
 RIGHT CRANKCASE COVER REMOVAL
 Drain the engine oil.
 Disconnect the clutch cable.
 Remove the right crankcase cover attaching
 13 bolts and right crankcase cover.
 Remove the clutch lever and bearing.




                                                  Guide Pin                Screws
 Remove the oil filter rotor cover. (Refer to
 3-3.)
 Remove the square nut.
 Remove the square nut (left hand threads)
 on the balance shaft driven gear.
 Remove the oil filter rotor.




                                                           Clutch

 Remove the oil pump gear cover.
 Remove the 6mm nut on top of the oil pump
 driven gear.
 Remove the oil pump driven gear and chain.
 Remove the oil pump drive gear and clutch
 outer drive gear from the crankshaft.




                                                                  Nut             Driven Gear
 CLUTCH REMOVAL                                 Clutch Outer            Clutch Lifter
 Remove the four clutch lifter bolts.
 Remove the clutch lifter and four tension
 springs.




                                                Tension Springs           Bolts
9-3