zing 125 qe Workshop-manual : Page 84

          9. CLUTCH/GEAR SHIFT MECHANISM                                           ZING II 125



 Install the clutch outer drive gear onto the
 crankshaft.
 Install the oil pump drive gear onto the
 crankshaft.
 Install oil pump driven gear and chain.




                                                  Oil Pump
                                                         Thrust Washer
 Install the clutch outer and thrust washer.
 Install the thrust washer with the chamfered
     side facing up.

 Install the oil pump chain and driven gear
 and secure it with the 6mm nut.
 Install the clutch assembly.
 Stagger the clutch friction disks and clutch
 plates and then put them on the clutch center.
 Then install the clutch center together with
 the well-arranged friction disks and plates
 into the clutch outer.



 Install the circlip.

 Install the circlip with the chamfered side
     facing down.




                                                         20mm Circlip
                                                              Bolts
 Install the tension springs and clutch lifter.
 Install the washers to the bolts and tighten
 the four bolts.
 Torque: 0.81.2kg-m
 Install the clutch lifter guide pin.




                                                                              9-8