10.CRANKCASE/CRANKSHAFT/TRANS- MISSION SYSTEM/STARTER SPINDLE Pulsar CK 125 Crankshaft Transmission Fork Shaft First install the left transmission fork spring and steel ball into the fork. Install the left transmission fork to the countershaft 5th gear and install the fork guide pin into the transmission drum groove. Install the transmission fork shaft. After installation, make sure that the main shaft and countershaft are parallel. Gasket Dowel Pins Install the crankshaft. Install the crankshaft squarely and do not strike it in forcedly. Install the dowel pins and gasket. CRANKCASE INSTALLATION Install the left crankcase onto the right crankcase. · Install the left crankcase by aligning the starter spindle with the left crankcase hole. · When installing the left crankcase, the dowel pins and gasket must be installed properly to avoid oil leakage. Tighten the eight crankcase attaching bolts. Torque: 0.81.2kg-m Tighten the crankcase attaching bolts diagonally and evenly. Install the following parts: · Starter motor/generator/left crankcase cover/starter clutch/camshaft (Refer to Section 8.) · Clutch/gear shift mechanism (Refer to Section 9.) · Cylinder/piston (Refer to Section 7.) · Cylinder head (Refer to Section 6.) 10-10