15. REAR CARRIER/REAR FENDER/ EXHAUST MUFFLER STRYKER 125/150 SERVICE INFORMATION GENERAL INSTRUCTIONS · When removing the rear carrier, be careful not to twist or kink the wires and cables to avoid shorted circuit. · The exhaust muffler must be removed when it is cold to avoid burns. · After installation, make sure that the taillight and turn signal lights operate properly. · When installing the exhaust muffler, first tighten the exhaust muffler joint lock nuts and then tighten the rear fork pivot nut. TORQUE VALUES Rear carrier lock bolt 3.04.0kg-m Rear fork pivot nut 5.57.0kg-m Exhaust muffler joint lock nut 1.82.5kg-m 15-2