1. GENERAL INFORMATION K-PIPE 50
Route harnesses so they are neither
pulled tight nor have excessive slack. Do not pull
too tight!
Protect wires and harnesses with
electrical tape or tube if they contact a
sharp edge or corner.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken
sheath, repair by wrapping it with
protective tape or replace it.
Do not press or
When installing other parts, do not press squeeze the wire.
or squeeze the wires.
1-8