15. ELECTRICAL EQUIPMENT SUPER 9 50 RESISTOR INSPECTION Remove the front upper/lower cover. ( 2-3) Measure the resistance between the resistor B pink wire and ground. Measure the resistance between the resistor A green/black wire and ground. Resistances: Resistor A: 9.910.5 Resistor B: 5.66.2 Faulty resistor is the cause of faulty operation of the auto bystarter. REGULATOR/RECTIFIER INSPECTION Resister A Resister B Remove the front upper/lower cover. ( 2-3) Disconnect the regulator/rectifier wire Bolt coupler and remove the bolt to remove the regulator/rectifier. Measure the resistances between the terminals. Replace the regulator/rectifier if the readings are not within the specifications in the table below. · Due to the semiconductor in circuit, it is necessary to use a specified tester for accurate testing. Use of an improper tester in an improper range may give false readings. · Use a Sanwa Electric Tester (07208- Coupler Regulator/Rectifier 0020000) or Kowa Electric Tester (TH-5H). The proper range for testing is listed below. A (Red) C (Yellow) Model Brand Range SP-10D Sanwa K TH-5H Kowa 100 Probe Probe(-) A (R) B (W) C (Y) D (G) A (R) B (W) 3-10K C (Y) 33- 35K D (G) 33- 35K B (White) D (Green) 15-6