Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
2. Inspect the muffler internally by shaking the muf-
fler back and forth and listening for rattles or loose
debris inside the muffler.
NOTE: For additional details on cleaning the muf-
fler/spark arrester, see Section 2.
INSTALLING MUFFLER
1. Using a new grafoil seal, place the muffler into
position engaging the mounting lugs into the
grommets; then slide the muffler forward.
2. Install the two exhaust springs. KC322A
3. Remove the auxiliary brake reservoir from the
body but do not disconnect the hose; then route
Rear Body Panel/Rack and secure the hose and reservoir out of the way
making sure not to spill brake fluid.
REMOVING
1. Remove the rear rack; then remove two cap screws
securing the rear body panel/fender to the side
frame and the cap screws securing the rear fenders
to the footwells.
KC306
4. Using a small screwdriver, remove the light con-
nectors from the frame; then disconnect both con-
nectors and remove the rear body panel/fender.
KC317A
8
KC281
KC316
2. Disconnect the battery (negative cable first) and
remove from the battery compartment; then dis-
connect the starter relay wires and route the wiring
out of the compartment.
8-9