15. ELECTRICAL EQUIPMENT SUPER 9 50 Performance Test Remove the ignition coil. Ignition Coil Inspect the ignition coil with an ignition coil tester. Ignition Coil Tester AC 110V 6V/12V 07508-0070100 Follow the ignition coil tester manufac- Changeover Watch Window turer`s instructions. Switch Black(-) Black 1. Turn the changeover switch to 12V and connect the ignition coil to the tester. 2. Turn the power switch ON and check the spark from the watch window. Good : Normal and continuous spark Black(-) Faulty : Weak or intermittent spark Red(+) Red(+) The test is performed at both conditions that the ignition coil is cold and hot. A.C. GENERATOR Exciter Coil/Pulser Coil Inspection This test is performed with the stator installed in the engine. Remove the met-in box. ( 12-4) Disconnect the A.C. generator wire connector. Measure the pulser coil resistance between the blue/yellow wire and ground. Resistance (20): 80160 Blue/Yellow 15-9