super 9 3 Workshop-manual : Page 73

          6. CYLINDER HEAD/CYLINDER/PISTON                                      SUPER 9         50


                                                                     Spark Plug Cap
 CYLINDER HEAD
 REMOVAL SH10AD
 Remove the rear carrier.
 Remove the frame body cover. ( 2-2)
 Drain the coolant.
 Disconnect the thermosensor wire from the
 thermosensor.
 Disconnect the water hose from the
 thermostat housing.




 Remove the spark plug cap.                        Exhaust muffler joint lock nut
 Remove the two joint lock nuts on the front
 of the exhaust muffler and then remove the
 two exhaust muffler lock bolts.
 The installation sequence is the reverse of
 removal.

   When installing the exhaust muffler,
   first tighten the two nuts on the front
   and then tighten the two bolts.




                                                                         Bolts

 Remove the spark plug.                        Cylinder head Bolts
 Remove the cylinder head bolts and the
 cylinder head.

   Loosen the bolts diagonally in 2 or 3
   times.

 Remove the cylinder head gasket.




                                                  Spark Plug              Cylinder Head


                                                                                      6-2