Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
11. If the brake pedal was removed during disassem-
bling, apply grease to the brake pedal pivot stud;
then install the brake pedal and secure with a flat
washer and cap screw. Tighten to 20 ft-lb.
KC249
KC232A
3
KC250
KC149A
12. Install the heat shield; then install the gas tank (see
Section 4).
13. Install the front body panel, front rack, and foot-
wells (see Section 8).
14. Pour the appropriate quantity and grade oil into the
crankcase; then connect the negative battery cable
and move the ATV outside to a well ventilated
KC251 area.
15. Start the engine and allow the engine to warm up
while checking for oil leaks; then shut the engine
off and check the oil level. Add oil as required.
3-47