mxu 400 Workshop-manual : Page 61

          11. Remove the cap screw holding the gear shift posi-
    tion switch onto the right-side crankcase half.




                                                                                                         MD1014



                                               KC324A
12. Remove the gear shift position switch. Account for
    a spacer.



                                                                                                                  3

                                                                                                         MD1016
                                                         15. Remove the cam chain.



                                               KC326A
13. Remove the one-way clutch noting the direction of
    the green dot or the word OUTSIDE for installing
    purposes.




                                                                                                         MD1335
                                                         16. Remove the oil pump drive gear cap screw.




                                                MD1286
14. Remove the left-hand threaded nut holding the
    centrifugal clutch assembly.

                ! CAUTION
Care must be taken when removing the nut; it has
"left-hand" threads.
                                                                                                         MD1018
                                                         17. Remove oil pump drive gear. Account for the pin.



                                                                                                          3-31