12. REAR BRAKE/REAR FORK/REAR WHEEL/REAR SHOCK ABSORBER QUANNON 125 INSTALLATION Caliper Inside Install the brake caliper to the rear fork and tighten the two bolts. Torque: 2.43.0 kg-m Longer Connect the brake fluid tube to the brake caliper and install fluid tube bolt, copper Shorter washers and tighten the fluid tube bolt. Torque: 3.04.0 kg-m Caliper Outside Fill the brake reservoir with the specified brake fluid and bleed air from the brake system. ( 14-10) When installing the brake fluid tube, be Fluid Tube Bolt bleed air bolt sure to install the two copper sealing washers. REAR FORK REMOVAL Remove the rear wheel. Remove the rear shock absorbers. Remove the cover the rear fork pivot nut to remove the pivot and rear fork. Copper Washers Remove the drive chain slider and check for Cover wear or damage. When replacing the rear fork pivot bushings, press the new bushings into the rear fork completely. INSTALLATION Pivot Bushing Install the rear fork in the reverse order of removal. Tighten the rear fork pivot nut. Torque: 5.57.0 kg-m After the rear fork is installed, install the following parts: Rear shock absorbers Rear wheel Drive chain cover Rear brake adjustment 12-4