Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
11. FUEL SYSTEM STRYKER 125/150
PILOT SCREW ADJUSTMENT
ADJUSTMENT
The pilot screw is factory pre-set and
no adjustment is n6cessary. During
carburetor disassembly, note the
number of turns of the pilot screw and
use as a reference when reinstalling it.
Place the motorcycle on its main stand
on level ground for this operation.
Pilot Screw
A tachometer must be used when adjusting
the engine speed.
Turn the pilot screw clockwise until it seats
lightly and back it out to the specification
given.
Standard Opening: 11/4 turns
The carburetor must be adjusted
when the engine is warm and the auto
bystarter is closed.
Do not force the pilot screw against
its seat to prevent damage.
Warm up the engine and adjust the throttle
stop screw to obtain the specified idle speed. Throttle Stop Screw
Idle Speed: 1600100rpm
Turn the pilot screw in or out slowly to
obtain the highest engine speed.
Slightly accelerate several times to make
sure that the idle speed is within the
specified range.
If the engine misses or runs erratic, repeat
the above steps.
11-14