11. FUEL SYSTEM STRYKER 125/150
Remove the main jet, needle jet holder, Needle Jet Slow Jet
needle jet, slow jet and pilot screw.
· Be careful not to damage the fuel jets
and pilot screw.
· Before removing, turn the pilot screw
in and carefully count the number of
turns until it seats lightly and then
make a note of this.
· Do not force the pilot screw against its
seat to avoid seat damage.
Pilot Screw Needle Jet Holder Main Jet
Clean the removed fuel jets with detergent oil
and blow them open with compressed air.
Blow compressed air through all passages
of the carburetor body.
INSPECTION
Valve Seat
Inspect the float valve and valve seat for
damage or clogging.
Inspect the float valve and valve seat
contact area for stepped wear or
contamination.
Worn or contaminated float valve and
valve seat must be replaced because it
will result in float level too high due to
incomplete airtightness.
11-10
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5